4G/LTE WIFI Router with LAN Switch and Serial connectivity for Professional users Contact / Kapcsolat
Typical Applications Broadband mobile internet connection for professional users WIFI Access Point Remote access of Ethernet-devices Remote access of Serial devices
Cellular options LTE-only version LTE Category 4: 150Mbps Download / 50Mbps Upload LTE supported bands: Quad band version: B3/B7/B20/B31 (with LTE450 support) Dual band version: B31/B38 (with LTE450 support) 2G/3G/4G version LTE Category 3: 100Mbps Download / 50Mbps Upload Five-Band FDD-LTE B1/B3/B7/B8/B20 Dual-Band TDD-LTE B38/B40 Dual-Band UMTS/HSDPA/HSPA+ B1/B8 Dual-Band GSM/GPRS/EDGE 900/1800 MHz Single SIM or Dual SIM (Mini-SIM, Micro-SIM, SIM chip) WIFI Access Point 11b/g/n (2.4 GHz) WEP Open System WEP Shared Key WPA-PSK/WPA2-PSK Mixed Mode WPA2-PSK WPA PSK MAC Filtering System Built in: Watchdog IPv4, IPv6 Internal and external log Firewall, Zones, Port Forwarding, Traffic Rules DHCP DNS NAT VPN QoS Static Routing FTP NTP Supported interfaces Ports 2 x Ethernet LAN port + 1 Ethernet LAN/WAN port (IPS-231) 1 x RS-232 + 1 x RS-232 or RS-485 serial port (factory configured) RS-232 (primary): TxD, RxD, DSR, DTR, RTS, CTS RS-232 (secondary): TxD, RxD RS-485: Data+ (A), Data- (B) ESD protection: 4kV Management Remote configuration via web user interface or CLI SNMP standard monitoring Active failover management Status indicators, buttons LED Indicators: WIFI, PING, Signal strength (1-3), ST1, ST2, SIM1, SIM2, WPS, PWR Reset button WPS button Connectors 3 x SMA antenna (LTE Main, LTE Aux, WIFI) 2 x RJ45 or 3 x RJ45 (IPS-231) 1 x SUBD 9F Construction Indoor version Housing: Anodised and powder-coated aluminium Weight: 210g Dimension (L x W x H): 110 mm x 107 mm x 26 mm Installation: 35 mm DIN-rail or desktop Operating Temperature: -20°C to +60°C IP Code: IP20 Outdoor version Housing: Plastic Weight: 1100g Dimension (L x W x H): 220 mm x 220 mm x 100 mm Installation: Wall-mount, pillar-mount Operating Temperature: -20°C to +60°C IP Code: IP67 Power Power supply interface (indoor version): 3.5 mm terminal block Power supply interface (outdoor version): PoE Ethernet connector Input voltage: DC 8-36 V Power consumption: Max: 7 VA Standards EN55024:2010 (ESD) EN55022:2010/AC:2011 Class B (RF) EN55024:2010 (Immunity against RF and EFT on USB and LAN lines)
