Cellular options

• Single module, LTE-only version (incl. 450MHz)
• Single module, 2G/3G/4G version
• Dual module version
  • Module 1: LTE-only module (incl. 450MHz)
  • Module 2: 2G/3G/4G module
• 4 SIM

WIFI Access Point

• IEEE 802.11 b/g/n
• Single stream 2.4 GHz band
• Hardware support for WEP, WPA and WPA2 encryption
• Soft-AP support

Fault tolerance

• Redundant cellular module
• Redundant SIM (3+1 SIMs)
• Redundant power supply
• Network failover management

Supported interfaces

• Ports
  • 4 x Power over Ethernet (PoE) LAN switch
  • + 1 Ethernet LAN/WAN port
  • 1 x RS-232 serial port
  • 1 x RS-485 serial port
  • 1 x High speed USB port
  • 4 x digital OIs
  • 4 x analog inputs
• RS-232: TxD, RxD
• RS-485: Data+ (A), Data- (B)
• ESD protection: 4kV

Architecture

• ARM9 Cortex-A8 32bit microprocessor (720MHz)
• 2x256Mbyte DDR3 SDRAM
• 512Mbyte NAND Flash
• LINUX operating system

System

• Built in Watchdog
• VPN: L2TP, IPSec, OpenVPN, GRE tunnel, IPIP tunnel
• 3DES and/or AES encryption
• Network Address Translation (NAT)
• Network Address Port Translation (NAPT)
• Diagnostic tools
• Policy
• Routing
• Static / Dynamic TCP/IP UDP/IP routing
• Dynamic DNS Client
• DMZ
• IP Firewall
• CHAP and/or PAP authentication
• PPP keep-alive function
• HTTP
• ARP
• ICMP
• GRE with optional tunnelling keep alive function
• TCP/IP SYN/ACK route inspection
• Active network failover management
• HTTP server and local access management
• DDNS, IP Report, Web/SSH
• Raw TCP Client Server, Raw UDP
• Log console
• Modbus IP Master Serial Gateway (optional)
• Programmable, self-scheduled data collection with expandable memory
• Status query and event forwarding with SNMP protocol
• Local communication with relay protocol

Management

• Admin Web GUI or SSH CLI
• SNMP standard monitoring
• Active failover management
• Intelliport Management Platform

Advanced security

• Hardware based cryptography (EAL 4+)
• Customizable security algorithms
• WIFI-Enterprise with Radius authentication

Status indicators, buttons

• LED Indicators
  • 2 x WIFI activity
  • 4 x MOBILE activity (1 and 2)
  • 4 x SIM activity
  • POWER
  • WAN
  • PPP
  • DATA
  • 2 x Status
  • 5 x Link
  • 5 x for customization
• Function button

Connectors

• 6 x SMA antenna (LTE Main, LTE Aux, GSM1, GSM2, WIFI, GPS)
• 5 x RJ45 PoE
• 1 x RJ45
• 1 x USB
• 1 x MicroSD Card
• 3 x 5-pin terminal block

Construction

• Indoor version
  • Housing: Anodised and powder-coated aluminium, powder-coated steel
  • Weight: 585g
  • Dimension (L x W x H): 154 mm x 93 mm x 42 mm
  • Installation: 35 mm DIN-rail or desktop
  • Operating Temperature: -20°C to +60°C
  • IP Code: IP20

• Outdoor version
  • Housing: Plastic
  • Weight: 1500g
  • Dimension (L x W x H): 220 mm x 220 mm x 100 mm
  • Installation: Wall-mount, pillar-mount
  • Operating Temperature: -20°C to +60°C
  • IP Code: IP67

Power

• Power supply interface (indoor version): 3.5 mm terminal block or PoE connector
• Power supply interface (outdoor version): PoE Ethernet connector
• Input voltage (primary): DC 12-48V, AC 9-36V
• Input voltage (backup): 12-48V DC
• Power consumption: Max: 15 VA

Standards

• EN55024:2010 (ESD)
• EN55022:2010 (RF)
• EN55022:2010 (Conducted disturbance)
• EN55024:2010 (Immunity against RF, EFT, Surge voltages and voltage DIP on AC and LAN lines)